| Features
& Specifications
- 7 digit liquid crystal display
- Frequency counter for digital on/off keying and analog signals with a minimum pulse width of 250uS
- Ultra sensitive synchronous detector
- Two range positions:
- 1ghz position for frequencies 30mhz to 0.8ghz
- 2.8ghz position for frequencies 500mhz to 2.8ghz
- 16 section bargraph to show RF signal strength (-35dBm to 0dBm)
- Two antennas
- Squelch adjustment for input signals
- Hold switch to lock the display
- Low battery indicator
| - Impedence: 80 Ohms (BNC Socket) VSWR less than 2:1
- Frequency Range: 30mhz - 2.8ghz
- Sensitivity: Less than 5mV
- Max. Input: 15 dBm
- Resolution: 10khz for digital signals or on/off key & 1khz for analog signals
- Weight: 210 grams
- Size: 80mm x 68mm x 31mm
- Housing: Stamped aluminum with black anodized finish
- Power: 9 vDC 300 mA
- Battery Life Full Charge: Average 5 hours
| The 709 has features that other units can't match. First and foremost is the readout which displays the frequency it detected activity on. This allows you to know the exact frequencies being used in your area. Knowing the frequency means that if you have a tunable receiver monitor, you can then tune into the signal. Other RF detectors only tell you if there is activity. This RF detector shows you there is activity, but also, shows you the frequency being used. Available Models: BP709
Related Products:
| 
