| Power, video, and audio in one cable, or operate 2 cameras from one cable. Cameras must be side by side in order to use one cable. We offer a Y power splitter in order to supply power to 2 cameras. This may not be an option for you if you have high amperage cameras such as our Super 48 Infrared Camera. Our 3 wire cables are Male RCA on both ends of the video and audio, and standard barrel male and female for power.
All of our hard wired cameras are plug and play ready regardless whether it is a board camera, infrared camera, or a professional box camera. If your camera has an RCA or BNC video, you use the same cable with a video adapter. We offer a complete line of adapters and connectors. One power end is female and other end is male, making installation a snap. It eliminates the need to run separate power cable or find power near the camera. Some individuals use these cables to add distance between the transmitter and camera for better reception.
These cables will allow you to have a hardwired camera up to 150 feet away and plug directly into your TV or VCR. You do not need to have a power outlet near the camera. It is not recommended to connect two cables together, due to power and video loss. Take note, these power video cables are 20 gauge wire for power. If you have a high amperage infrared camera it may not power it properly, and you will not have optimum performance. In that case, you should be using Siamese cable which is RG59 for video and 18 gauge for power. When using Siamese you may be able to have up to 800 ft. runs of cable. Available Models: CABP100A
Related Products:
| 
